Cleanser Concentrate
Dilution Instructions

Complete all of the following before mixing:

1. Wash hands thoroughly.
2. Check that all equipment, the working area, and your clothing are clean. Tie hair back or wear appropriate protection.
3. Confirm the pump bottle is clean, dry, and free from water traces.
4. Confirm the Prolong Lash Cleanser Concentrate is not expired and does not appear or smell off.

1. Using the measuring jug, measure exactly 20ml of Prolong Lash Cleanser Concentrate. Add to the pump bottle.
2. Using the measuring jug, measure exactly 40ml of distilled water. Adjust as necessary before adding to the pump bottle.
3. Secure the lid tightly.
4. Shake the bottle well to mix the contents.
5. Repeat to fill additional pump bottles as required.
6. Clean all equipment after use. Replace the cap on the Concentrate bottle and store appropriately.

1. Affix the ingredient label to the bottle.
2. Add the date of filling to the label.

For each batch prepared, record the date of preparation and the batch code of the Cleanser Concentrate used. Maintain these records for traceability purposes.

• Store the Concentrate and pump bottle packaging in dry, clean conditions at all times. Repackaging into any other container is strictly forbidden.
• When selecting Concentrate for preparation, follow the first-in, first-out rule. Use older stock before newer stock.
• When supplying prepared cleansers to customers, also apply the first-in, first-out rule. Best practice is to prepare cleanser as needed rather than holding diluted stock.

Before supplying diluted product to any customer, confirm all of the following:

• No contamination occurred during filling.
• The correct quantities of Concentrate and water were filled into the pump bottle.
• The ingredient label has been affixed to the bottle.
• The date of filling has been added to the label.
• Records have been kept for traceability.